Prevent strangulation - yet another reason to "lock the belt" (i.e. switch the retractor to the automatic locking mode)

PROBLEM:
Kids will be kids.  Strapped in with nothing to do, kids will find something - anything - to play with.  Unfortunately, several dozen kids have nearly strangled to death after finding an unused shoulder belt, and in the midst of playing with it, wrapped it around their neck. 

Why can't you simply unwrap the belt, you might be thinking?  By pulling the shoulder belt out to the very end, the children have inadvertently switched the shoulder belt into a locking mode - one where the shoulder belt only gets shorter, but can not be lengthened no matter how hard you pull.  With the belt in this locking mode, it is very difficult for the child - and even the parents - to free the belt from the child's neck.

The New York Times Magazine featured an article by Matt Bai, where he writes of his own harrowing experience where his 3-year-old son Ichi nearly strangled to death while playing with the unused shoulder belt in the center seat of their vehicle. 

SOLUTION: 

Make sure any shoulder belts within your child's reach are switched to their locking mode. 
For a detailed explanation of this locking mode and how to switch the belt in and out of it, please see our earlier post here.  

Safety Belt Safe has a fantastic easy-to-print tip sheet on how to keep kids safe from entanglement.
Photo above (copyright Heather Corley 2009) - is from a great article on about.com

A few tips:

• Teach children that seat belts are not toys. 
• Be aware that most shoulder belts have a retractor with two locking modes - an emergency locking mode and an automatic locking mode.
• To lock the retractor (i.e. switch it from the emergency to automatic locking mode): Slowly, without yanking, pull the shoulder belt all the way out.  As the belt goes back into the retractor, a ratcheting (clicking) sound may be heard. The belt cannot be loosened without unbuckling the belt and letting most of it go back into the retractor.
• For any child: 
• Make sure that any shoulder belts nearby to the child are switched to their locked mode.
• Buckle any nearby shoulder-lap belts.  Slowly, without yanking, pull the shoulder belt out to the very end.  As you let the belt go back in you will usually hear a ratcheting (clicking) sound - this is normal.
• For kids riding in shoulder-lap belts (with or without booster seats)
• After the child is buckled, slowly pull the shoulder belt out all the way to lock the retractor.  This will prevent the child from being able to wrap the belt around their neck.  Don't forget to snug the belt up after pulling it all the way out. 
• For kids riding in 5-point harness car seats: 
• If you have used the vehicle's shoulder-lap belt to secure the child seat to the car:
• Follow installation instructions in the manuals for the child seat and the vehicle. 
• After installation, make sure that the shoulder belt is either locked tight without slack or that it moves freely in and out and cannot be locked.
• If you have used the lower LATCH connectors to secure the child seat to the car:
• First, buckle the shoulder–lap belt and lock the retractor, and remove the slack in the belt so it lies flat against the vehicle seat. 
• Install the child seat with the lower LATCH connectors according to instructions. 
• Note: Some vehicle manufacturers state the unused belt should be released from the buckle after the safety seat is installed.
• Always check the owner's manual to your vehicle & child car seat as they may have specific instructions.  

How to outsmart a squirmy worm in a booster - Use the AUTOMATIC LOCKING RETRACTOR. Learn how below...

PROBLEM:

Do you have a squirmy worm riding in a booster seat?  Is your 6 year old half way across the back seat, but still buckled into their booster?  Do you tell your child in a seat belt to "sit still" a dozen times a car ride and it doesn't seem to work?  

SOLUTION:

For many kids, the solution is as simple as putting the seat belt into a special locking mode (in technical terms, engaging the automatic locking retractor).   

**Please note: If your child is 4 or younger and/or locking the seat belt does not keep them sitting still, then we would strongly recommend the child ride in a 5 point harness that is certified for bigger kids (i.e. the harness goes to at least 60 pounds).

Almost all shoulder belts have a retractor. The retractor is the device that not only spools the excess belt, but also locks the belt so that it holds you tight in a crash.

All shoulder belts typically have an emergency locking retractor.  This means that during normal driving the belt is loose - it slides freely in and out - but locks tight in an emergency, like when you slam on the brakes.  During normal driving, with the shoulder belt in the emergency locking mode, you can lean forward and back - an amount of freedom of movement that is just too much for many children in booster seats and seat belts as they can't resist the urge to wiggle and squirm.

If your car is a 1996 or newer, the retractor is usually a switchable retractor - meaning that it can switch from the usual mode of locking only in an emergency, to a mode where it locks at all times - called the automatic locking mode.  Changing the belt from the emergency to automatic locking modes is easy - simply pull the shoulder belt out all the way (do it slowly) - when you get to the very end, let the belt go back in.  As it goes back in you will likely hear a ratcheting sound - and if you give a gentle pull you will notice that the belt is locked.

In the automatic locking mode, the shoulder belt only gets shorter - it does not get longer.  Meaning, you can not lean forward to pick up your toy or fight with your sibling on the other side of the car.  With the belt in the automatic locking mode, the seat belt holds tight at all times just like the child was used to when they were riding in a 5 point harness car seat. 

Some cars do not have a switchable retractor.  Most Jeep, Chrysler, and Dodge vehicles do not have switchable retractors - they only have the emergency locking retractor.  Other vehicles that may not have a switchable retractor are some vehicles made by GM, Ford, Saab, and Volvo. 

Let's play - What was the car maker thinking?? (or - were they thinking at all?)

It's the disappearing center seat!

Why should you care?

• The center of the back seat is the safest place of the car
• Studies show kids are 43% safer if they ride in the center instead of the side

What does a "normal" center seat look like?

2010 Honda Accord Sedan
Center: 15 inches wide

What car seats might work in a narrow center seat?

• If you or a parent you are helping have a vehicle with a narrow center seat, we at The Car Seat Lady recommend trying the Graco Snug Ride 35 (if you need an infant seat) or the Britax Marathon / Boulevard (if you need a convertible seat).  We find these two seats to fit in narrow situations where other seats won't.  However, there are some centers that are too narrow for even these seats.  While the First Years True Fit Premier has a narrower footprint than the Britax, the head area of the First Years is wider and often won't fit rear-facing in the center of the vehicle without forcing the driver to sit too close to the steering wheel (the contours at the top of the Britax tuck themselves nicely between the two front seats).  
• For reference, the footprint of the Graco Snug Ride 35 is 9.25 inches and the Britax approximately 13 inches.

Get ready to watch the center seat disappear!
Note: All of these center positions have top tether anchors (for forward-facing car seats) - which means that someone who made the car thought it would be possible to install a car seat in this position.  I'm wondering what they were smoking?

It gets narrower...

2010 BMW X5Center: 9.5 inches "wide"

Best part: if you can find a forward-facing car seat that is narrow enough, the head rest is fixed and angled forward which prevents the car seat from resting flush against the back of the vehicle seat, and thereby prevents a tight installation

And narrower...

2010 Infiniti EX35Center: 9 inches "wide"

(check out the dual hinges the center is sporting - this center is a car seat nightmare)

and narrower...

2010 Nissan Cube

Center: a svelte 8 inches

Worst part for a car seat: the seat belt & buckle are 5 inches forward of the bight!

wait - it's almost non-existent here...

2010 Toyota Highlander - back view

My bottom hurts just looking at this center seat

2010 Toyota Highlander - front view

I didn't get to measure as I lost my tape measure, 

but the center is probably about 6 inches "wide"

Wait... it did disappear!

2011 Mini Cooper Countryman

Finally, a wise decision - if you don't have room for a center seat, don't tease us with 8 inches of a seat that is unusable for a car seat or a human body

Monday's Mistake - Humps & Hinges - or "What was the auto maker thinking???"

This is not the typical mistake Monday - as there aren't even any car seats in most of the pictures!  The sad part is that these "mistakes" appear in real vehicles - and they make installation of car seats/boosters quite a challenge.  Unfortunately, there were many more vehicles with humps & hinges I could have shown - I just selected a few for this post.

HINGES 101

Q: Why are hinges bad?  
A:  In order to install a car seat properly, you need to sink it down and back into the vehicle's seat cushion.  Rigid structures - like metal hinges & the plastic covers for them - prevent the car seat from sinking into the seat cushion - leaving you with a loosely installed car seat (and an unsafe child). 

2010 Toyota Venza

Is that a center seat - or just one big hinge with a little bit of fabric & cushioning?

Check out how the seat belt for the center seat is several inches into the passenger seat - gotta love the overlapping!

2010 Toyota RAV-4

Close-up of the center seat

Are you kidding me?  This is supposed to be a family car.  

Let me tell you why this center seat is a recipe for disaster for car seat installation.

1. You have 5 inches from the buckle for the center seat to the buckle for the driver side seat.  Have you seen a car seat that is 5 inches wide?  I didn't think so - as newborns are wider than 5 inches!
2. You have not only 2 upper hinges, but also one lower hinge cover in this center seat - all to prevent you from getting the car seat tightly installed.
3. The "lumbar bolster" (my name for it) - will further push the car seat away from the back of the vehicle seat. 

HUMPS 101

Q: The center seat in the back has a hump.  Why are some humps bad?
A: Humps can pose a challenge for several reasons.

 2010 Acura RL Tech - hump makes the center seat 4 inches higher than the side seats

• The foam under the center hump is often more rigid than the foam under the side seats' cushion - which means that when you try to install the seat you have to use more muscle to compress the hump so that the car seat gets tight.
• Some humps are off center from where the LATCH system's lower anchors or the vehicle's seat belt is located.  In this picture below, the vehicle has a hump in the center.  The lower anchors for the side seat are half on the side and half into the center seat (we'll explain later on this week why they spaced the lower anchors this way).  With the car seat sitting half on the hump in the center and half off the hump, you end up with a car seat that looks drunk.   

 Lincoln MKS 2010 - Combi Coccoro using LATCH on the passenger side

•  While most humps are on the bottom cushion of the vehicle seat - some are on the back cushion, which further pushes the car seat forward and prevents it from sinking into the vehicle's seat cushion.

2010 Nissan Maxima - with center hump protruding from the back cushion

Buying a car? Learn about these must-have safety features before you buy.

When buying a vehicle (new or used) it's important to make sure that it will be safe for everyone - the kids & the adults. Deciding which vehicle to buy can be overwhelming, but here are some must-have safety features that might help narrow down your list. The Car Seat Lady feels that the following 3 features are non-negotiables (i.e. if the vehicle doesn't have it, I wouldn't buy it).
At the bottom are some links to crash test ratings for new and used vehicles.

MUST-HAVE SAFETY FEATURES

1. Electronic Stabilization Control (ESC)
   Like most people, you have probably never heard of this technology - but it is expected to save more lives than the invention of the seat belt - as it PREVENTS crashes from happening in the first place! If all vehicles were equipped with ESC, as many as 9,000 fatal crashes could be avoided each year in the US.
   
   Electronic Stabilization Control (ESC) systems are marketed under various names, including dynamic stability control, vehicle stability control, dynamic stability and traction control, among others. The percentage of vehicles with this technology has increased tenfold since the 1998 model year. For the 2009 model year, ESC was standard on 73 percent of new passenger vehicle models and optional on 14 percent.
   
   Curious about ESC? Click here for a great explanation of ESC and how it works. Curious whether your vehicle (or the one you are considering buying) has ESC? Click here to see all the vehicles since model year 1995 with ESC.
2. Side-Impact Airbags (SABs)
   The best SABs are those that offer head protection to the front AND back seat passengers. Visit this website from the Insurance Institute for Highway Safety to learn which vehicles offer side airbags. When you find a vehicle you are interested in, click on the "view details" button to learn about which type of side airbags are featured in that vehicle.  Curious if side airbags are safe for your kids - please click here to read more about the safety of SABs for ALL members of your family.
3. Adequate cargo space
   Cargo in the passenger area just isn't safe. Things (objects, people, etc) become very heavy in a crash - they will weight their usual weight TIMES the speed of the crash. For example, a 10 lb baby in a 30mph crash will weigh 300 lbs! Unrestrained people and objects will fly around in a crash - becoming missiles that can injure the other people in the car.   Make sure you have enough trunk space so that cargo stays out of the passenger area. If buying a vehicle with a 3rd row, it is ideal to keep the third row up, allowing it to serve as a barrier between the cargo and the passengers in the 2nd row.

CRASH TEST RATINGS
Two separate government agencies - NHTSA and IIHS - offer crash test ratings for new and older vehicles. Both try to determine a vehicle's crash worthiness using multiple parameters. The frontal crash done by IIHS is more stringent (10mph faster and off-center), which explains the sometimes discrepant results between the two sites.

Cocco (the Combi Coccoro) and I go to the NY Auto Show

Cocco (the Combi Coccoro) rides the subway to the NY Auto Show

Oh my gosh... I am one exhausted car seat lady!  186 different vehicle models and 7 hours of schlepping a car seat + laptop + camera... but it was all worth it. Stay tuned for the highlights (and the strange but true) - along with a list of the 2010 vehicles that exceed the minimums for lower anchors and top tethers (very useful info for parents with 3 or more kids when purchasing a vehicle).

Answers to "Mistake Monday" 4/5/10

ANSWERS: (please see bottom of page for teaching points on LATCH)

MISUSE

• The lower anchor belt & vehicle shoulder/lap belt are BOTH used
• The lower anchor belt is used in the center seat - in a vehicle which only has the lower anchors for the two side seating positions in the back seat
• The vehicle's shoulder/lap belt is routed UNDER (instead of over) the metal LATCH bar. 

 Image: Forward-facing Britax Boulevard with vehicle's shoulder/lap belt & top tether

Note: 

• When using a lap belt (no shoulder belt), the lap belt gets routed UNDER the LATCH bar on the Britax Marathon/Boulevard/Advocate.
• The shoulder belt WAS properly routed through the built in locking clip - but it was not shown in this picture since the appropriate locking clip is on the opposite side of the seat.  For forward-facing, use ONLY the built in locking clip that is on the side opposite to where the vehicle's seat belt buckles in.  
• There is no need for a metal locking clip with this installation because 1. the Britax Boulevard has a built in locking clip for forward-facing which must be used with a shoulder belt installation and 2. this vehicle is post-1996 and therefore has a way to keep the shoulder belt locked for the car seat (in this case a switchable retractor)

TEACHING TIPS -  LATCH 101

WHAT IS LATCH?

• LATCH stands for Lower Anchors and Tethers for CHildren. It's also known as ISOFIX in Europe and LUAS (Lower Universal Anchorage System) in Canada.
• LATCH is a way to secure a child safety seat to the vehicle using straps from the child safety seat that connect to special metal anchors in the vehicle.

DOES MY CAR HAVE LATCH?

Vehicles since model year 2003 must have lower anchors in at least TWO positions and tether anchors in at least THREE positions. This means that in most vehicles, the side seats have lower anchors AND tether anchors, while the center seat has a tether anchor but NO lower anchors.  See below for info on the few vehicles that do have lower anchors for the center seat.

SOME DEFINITIONS

• VEHICLE LATCH ANCHORS
•  LOWER ANCHORS: Lower anchors are a pair of metal “u-shaped” bars hidden in the vehicle’s seat cushion (where the part you sit on meets the part that your back rests on).
• TETHER ANCHOR: A tether anchor is a metal ring found behind (or sometimes under) the vehicle seat.

This picture shows a typical back seat with the 2 pairs of lower anchors - one for each of the side seats.  The standard spacing between the lower anchors is 11 inches.  Note how the spacing between the inner most anchors is wider than 11 inches.  

***The middle in this picture - and in most vehicles - is NOT a position that has the lower anchors.

This diagram shows how variable the location for the top tether can be - always check the vehicle owners manual for details. 

•  CHILD SAFETY SEAT LATCH STRAPS
• LOWER ANCHOR STRAP: All child safety seats that use the vehicle’s lower anchors have a lower anchor strap with a hook on either end. Some child safety seats have two separate lower anchor straps, each with a hook on one end. These hooks connect to the vehicle’s lower anchors.
• TETHER STRAP: All forward-facing child safety seats that use LATCH come with not only a lower anchor strap, but also a tether strap. The tether strap comes from the top of the car seat and has a hook on the end that lets it connect to the tether anchor in the vehicle. 

An Analogy - Lower Anchor Strap:Vehicle Seat Belt as Contacts:Glasses

Lower anchors are used INSTEAD of the vehicle's safety belt to secure the child safety seat to the vehicle.  Just like you wouldn't wear contacts and glasses on the same day - as you would see worse rather than better - so too you don't want to use the lower anchors AND the vehicle's seat belt to secure the car seat.  Choose one or the other, as appropriate for the seating position where you are installing the car seat.

Note: in the future there may be a child safety seat that allows for both the lower anchors and vehicle's seat belt to be used at the same time, but currently none allow for this or recommend it.

It's ALWAYS BETTER WITH A TETHER (Forward-facing that is)

Tethers are used IN ADDITION to the lower anchors OR the vehicle's safety belt to secure a forward-facing child safety seat to the vehicle.  Tethers keep a child's brain and spinal cord much safer by decreasing how far the head moves forward - typically by 4-8 inches - which can mean the difference between the child's head hitting something hard or not.

This picture shows a real crash test (using dummies) - where one seat was installed with a top tether and one without.  Notice how the dummy's head moves 6 inches farther forward when the top tether isn't used!

Which vehicles have lower anchors for the CENTER seat?
Stay tuned - I'm off to the NY Auto Show today and will update this portion soon. 

Most common LATCH mistakes:

1. Child safety seat is installed too loosely
2. Tether not used on a forward-facing car seat
3. "Borrowing" the inner most lower anchors from the two side seats to secure a car seat in the center (as was shown in this week's mistake monday picture)
4. The lower anchor strap is not routed through the correct path on the car seat - for example, the strap may be routed through the rear-facing belt path when the seat is forward-facing.

Monday's Mistake - can you spot the mistake/s in the picture?

This is a forward-facing Britax Boulevard installed in the center of a 2006 Honda Pilot (for those who are curious, the top tether is attached properly - it just isn't shown in the picture).

Stay tuned for some great teaching tips tomorrow on LATCH when I post the answers. 

Answers to "Mistake Monday" 3/15/10

ANSWERS: 
(please see bottom of page for teaching points & a printable version of the American Academy of Pediatrics' tips for positioning newborns and preemies in car seats)

MISUSE
- **The baby's chin is on his chest**
- There is an aftermarket infant head support used (the white product behind the child's head)
- Harness straps are too loose
Note: The buckle hardware resting on the infant's abdomen is not dangerous.

INJURY PATTERNS ASSOCIATED WITH THE MISUSE

The Baby Stops Breathing!
Unlike our other mistake Mondays, the biggest mistake in this picture - the infant's chin on his chest - is likely to harm the baby without a crash even occurring.  The recent recall of thousands of infant slings highlighted this same issue - that newborns can stop breathing if their chin rests on their chest.  

Small infants have very short necks, so when the neck flexes the chin falls forward onto the chest and the infant's own chest presses on the chin.  Until babies are at least a month old, the connection between the jaw (mandible) and the skull bones (temporal bone) is not formed, which means that pressure upwards and backwards on the jaw, as happens when the chin rests on the chest, pushes the jaw backwards.  The tongue sits inside the jaw bone and is pushed into the back of the mouth and onto the soft palate.  The tongue thereby completely blocks the flow of air from the nose into the lower parts of the airway.  Babies ONLY breathe through their nose (except when crying and gasping).  Babies can not switch and breathe through their mouth as older kids and adults can - so if the flow of air is blocked between the nose and the lower airway, the baby will stop breathing.

The ironic part is that U-shaped infant head supports, which by the way have no safety regulations or crash testing that they must conform to, actually make matters worse.  Head supports, like the one in the picture, which try to prevent the infant's head from turning to the side often make matters worse.  The back of an infant's head (occiput) is very prominent.  Forcing the head to rest straight forward, as these infant head supports try to do by preventing the head from turning to the side, only encourages the head to fall forward and the chin to rest on the chest.  Having the baby's head turned slightly to the side (but with the chin far above the chest) is a much more natural position for the infant's large head.

TEACHING TIPS -  

3 Steps to Keeping an Infant's Head in a Safe Position 

1.  Make sure the harness straps are snug

•      Snug straps keep the body & head straighter by preventing the baby from slumping over
•      Some infant seats are too big for preemies & small newborns - check to see if yours is appropriate here

2.  Make sure the car seat is as reclined as the manufacturer allows

•  For most infant seats, the most reclined the seat can be is so that the part where the infant's head & back rests makes a 45 degree angle to the ground.   Most seats have a level indicator - be it a bubble level, pendulum gauge, or just a straight line - to help you know how reclined the seat can be when in the vehicle.
• Image from AAP - showing a rolled towel under the base to help acheive the 45 degree angle

3.   Do NOT place anything behind or in front of the baby's head & neck

• Do NOT use an infant head/body positioner that did not come with the car seat.  Such "aftermarket" products are not tested for safety - either in a crash or just general safety - and often make the situation worse by tipping the head forward and changing how the straps fit on the child's body.  In addition, the use of an "aftermarket" product in a car seat will void the car seat manufacturer's warranty.  Please see the bottom of this post for more specific information from each car seat manufacturer - along with an easy-to-print handout on the topic.
• Most infant seats come with removable infant head rests. Of the infant car seats currently on the market with removable head rests, all can be safely removed EXCEPT for the one in the Britax Chaperone (as this one is part of the side impact protection of the seat).  Except for the one in the Britax Chaperone, these infant head rests are NOT safety features of the seat - so if you think that the head rest is either not improving, or worsening, the infant's head position we would recommend removing it. 
• If you do not like how it looks with the baby's head turned to the side, you can roll two small diaper cloths and place them alongside the baby's head.

The American Academy of Pediatrics issued an updated Clinical Report on Safe Transportation of Preterm and Low Birth Weight Infants at Hospital Discharge - which has great tips for positioning newborns of all sizes in car seats.

References:
Bull MJ.  Safe Transportation of Preterm and Low Birth Weight Infants at Hospital Discharge. Pediatrics. 2009 May 5; 1424-1429.

Tonkin SL. Airway of babies in car seats. The New Zealand Medical Journal. 1998 Sep 25;111(1074): 372

Aftermarket Products: What Do The Car Seat Manufacturers Think of Them??

**For an easy-to-print handout of this information, click here***

Fleece bunting - NOT SAFE for the car seat

You've seen them - the infant head inserts, the fleece buntings, the shoulder strap covers - they line several aisles in most Babies R Us. They are made to be used with the car seat - but didn't come with the car seat.

Did you know that unlike your child's car seat which must pass rigorous crash testing, these "aftermarket products" have no crash testing or other crash safety standards they must meet? Most parents buy these products thinking they will make the car seat safer and more comfortable for their baby - not realizing that these products usually turn a safe car seat into an unsafe one.

But don't take our word for it, here is what the car seat manufacturers have to say about aftermarket products. These excerpts were taken directly from the child safety seat instruction manuals.

* Baby Trend

o Do Not dress your child in bulky clothing or other garments that will hinder the harness from being snug around your baby and properly latched between your child's legs.

o Accessory products for use with the Safety Seat are acceptable for use provided that they do not interfere with the harness assembly, or the proper adjustment of the harness such that it remains tight on the child's shoulders at all times. Thick, soft, or other compressible material in excess of 1/4 inch thick should not be placed behind or under the child or between the child and harness straps. Examples of accessory products are head support pillows or rolled blankets to add additional head support.

* Britax

o The use of non-Britax Child Safety, Inc. covers, inserts, toys, accessories, or tightening devices is not approved by Britax. Their use could cause this restraint to fail Federal Safety Standards or perform worse in a crash. Their use automatically voids the Britax warranty.

* Chicco

o NEVER use clothing or blankets that interfere with fastening or tightening the harness. An unsecured child could be ejected in a sudden stop or crash! To keep child warm, place a blanket over child and restraint AFTER you have properly secured child in harness.

o DO NOT use any accessories, pads or products supplied by other manufacturers with this Child Restraint. Items not tested with this restraint could injure your child.

* Dorel (Maxi Cosi, Cosco, Eddie Bauer, Safety 1st):

o Dorel Juvenile Group does not recommend the use of any child restraint accessories except those recommended by DJG.

* Evenflo

o In cold weather, DO NOT dress the child in bulky clothing like snowsuits if the child is riding in a child restraint. Bulky coats/ snowsuits make it difficult to properly tighten the harness to the child, which may allow the child to be ejected from the restraint during a crash.

* Graco

o DO NOT use accessories or parts other than those provided by Graco. Their use could alter the performance of the car seat.

* Orbit 

o Do not modify your Infant Car Seat or Base. Only use products and accessories approved by Orbit Baby to ensure the safety of your child. This limited warranty does not apply to: defects resulting from use with covers, inserts, accessories, tightening devices, or other components not supplied by or expressly approved in writing by Orbit Baby.

* Peg Perego

o Use only approved parts. Use of unapproved parts can affect the safety of the car seat and cause serious injuries in an accident.

* Sunshine Kids

o Using any non-Sunshine Kids product with this restraint; or any product not specifically approved by Sunshine Kids for use with this restraint is not allowed. Use of such products voids manufacturer's warranty and may seriously impact the products ability to perform properly in an accident.

A chilling reminder why kids need car seats on EVERY trip.

Sometimes you have to try and make lemonade out of lemons.  Perhaps the senseless deaths of so many people in this crash will convince just one parent of the importance of using a car seat on every trip.  

Going in someone else's car - and tempted to not bring your child's car seat? 

Yesterday, 13 members of a family were traveling together to a wedding. The unbelievably horrific happened when a tractor trailer crashed into them.  A baby who was held by relatives died in the crash.  The silver lining to this story - the 2 children who were riding in car seats were the only survivors. 

Always use a car seat - on EVERY trip.

 Image: (C) (AP Photo/Daily News, Joe Imel)